Product range	RMQ-Titan
Basic function	Selector switch actuators
Single unit/Complete unit	Complete unit
Design	With thumb-grip
Connection type	maintained
Degree of Protection	60° ⥥ 60°
Front ring	Screw connection
Connection to SmartWire-DT	3 positions
N/O = Normally open	IP66
Contact sequence	Bezel: titanium
Front dimensions	no
Instructions	2 N/O
Standards
Lifespan, mechanical [Operations]	29,7
Operating frequency [Operations/h]	Stay-put/spring-return function, can be changed with coding parts M22-XC-Y Contactor states 0, I and II correspond with the position of the actuator as viewed from the front.
Operating torque (screw terminals)	IEC/EN 60947 VDE 0660
Climatic proofing	> 0.1 x 106
Degree of Protection	≦ 2000
Ambient temperature >Open	≦ 0.3 Nm
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance	IP66
shipping classification	-25 - +70 °C
Rated operational current for specified heat dissipation [In]	As required
Heat dissipation per pole, current-dependent [Pvid]	30 Shock duration 11 ms Sinusoidal according to IEC 60068-2-27 g
Equipment heat dissipation, current-dependent [Pvid]	DNV GL LR
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	6 A
Operating ambient temperature min.	0.11 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	-25 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	+70 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Please enquire
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Number of switch positions	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of control element	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Suitable for illumination	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
With light source	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Colour button	3
Hole diameter	Toggle
Width opening	No
Height opening	No
Switching function latching	Black
Spring-return	22 mm
Degree of protection (IP)	0 mm
Degree of protection (NEMA)	0 mm
Supply voltage	Yes
Number of contacts as normally open contact	No
Number of contacts as normally closed contact	IP66
Number of contacts as change-over contact	4X
Type of electric connection	0 - 0 V
With front ring	2
Material front ring	0
Colour front ring	0
Product Standards	Screw connection
UL File No.	Yes
UL Category Control No.	Plastic
CSA File No.	Chrome
CSA Class No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
North America Certification	E29184
Degree of Protection	NKCR

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.