| Basic function |
Optical sensors |
| Product range |
E65 SM Series |
| For connection of: |
2 m connection cable |
| Design (outer dimensions) |
33 x 41 x 37 mm |
| Rated operational voltage [Ue] |
10 - 30 V DC |
| Rated switching distance [Sn
] |
15000 mm |
| Description |
Source (for combination with detector) |
| Connection |
4-wire |
| Function |
Thru-beam photoelectric sensor |
| Material |
Insulated material |
| Switching type |
NPN PNP |
| Switching principle |
Light switching |
| Notes |
for combination with transmitter |
Information relevant for export to North America |
Product Standards UL 508; CSA-C22.2 No. 14; IEC60947-5-2; CE marking UL File No. E166051 UL Category Control No. NRKH, NRKH7 CSA File No. UL report applies to both Canada and US CSA Class No. – North America Certification UL listed, certified by UL for use in Canada Max. Voltage Rating 30 V DC Degree of Protection IEC: IP68, IP69K; UL/CSA Type: 1, 3, 4, 4x, 6, 6P, 12, 13 |
| Standards |
IEC/EN 60947-5-2 |
| Ambient temperature |
-25 - +55 |
| Operation [ϑ] |
-25 - +55 °C |
| Storage [ϑ] |
-25 - +70 °C |
| Mechanical shock resistance |
50 Shock duration 10 ms g |
| Degree of Protection |
IP68, IP69 |
Rated switching distance >Rated switching distance [Sn
] |
15000 mm |
| Range |
15 mm |
| Rated operational voltage [Ue] |
10 - 30 V DC |
| Maximum load current [Ie
] |
< 100 mA |
| Operating current in the switched state at 24 V DC [Ib
] |
20 mA |
| Response time |
1 ms |
| Switching state display |
Red LED |
| Operating voltage display |
Green LED |
| Boundary gain |
Yellow |
| Protective functions |
Short-circuit protective device Protection against polarity reversal Protection against wire breakage |
| Connection |
4-wire |
Style >Design (outer dimensions) |
33 x 41 x 37 mm |
| For connection of: |
2 m connection cable |
| Material |
Insulated material |
| Operating ambient temperature min. |
-25 °C |
| Operating ambient temperature max. |
+55 °C |
| Scope of delivery of the one-way system |
Receiver |
| Opening angle |
0 ° |
| Pre failure notice |
No |
| With time function |
No |
| Rated switching distance |
15000 mm |
| Max. switching distance |
15000 mm |
| Max. output current |
100 mA |
| Reflector included |
No |
| Analogue output 0 V ... 10 V |
No |
| Analogue output 0 mA ... 20 mA |
No |
| Analogue output 4 mA ... 20 mA |
No |
| Analogue output -10 V ... +10 V |
No |
| With other analogue output |
No |
| Setting procedure |
Other |
| With communication interface analogue |
No |
| With communication interface AS-Interface |
No |
| With communication interface CANOpen |
No |
| With communication interface DeviceNet |
No |
| With communication interface Ethernet |
No |
| With communication interface INTERBUS |
No |
| With communication interface PROFIBUS |
No |
| With communication interface RS-232 |
No |
| With communication interface RS-422 |
No |
| With communication interface RS-485 |
No |
| With communication interface SSD |
No |
| With communication interface SSI |
No |
| Number of semiconductor outputs with signalling function |
2 |
| Number of contact energized outputs with signalling function |
0 |
| Number of protected semiconductor outputs |
0 |
| Number of protected contact energized outputs |
0 |
| Type of interface for safety communication |
Other |
| Type of electric connection |
Cable |
| Type of switching output |
PNP/NPN |
| Type of switch function |
Other |
| Operation agent-safety class |
Safety class 2 |
| Explosion safety category for gas |
None |
| Explosion safety category for dust |
None |
| Construction type housing |
Cuboid |
| Width sensor |
33 mm |
| Diameter sensor |
0 mm |
| Height of sensor |
43 mm |
| Length of sensor |
41 mm |
| Sensing mode |
Light-/dark switching |
| Material of optical surface |
Plastic |
| Material housing |
Plastic |
| Max. output current at protected output |
0 mA |
| Min. reflector distance |
0 mm |
| Ambient temperature |
25 - 55 °C |
| Time of reaction |
1 ms |
| Transmission range of the safety field |
0 m |
| Switching frequency |
500 Hz |
| Type of safety acc. IEC 61496-1 |
|
| "Switching voltage of OSSD at state ""high""" |
30 V |
| Rated control supply voltage Us at AC 50HZ |
0 - 0 V |
| Rated control supply voltage Us at AC 60HZ |
0 - 0 V |
| Rated control supply voltage Us at DC |
10 - 30 V |
| Voltage type |
DC |
| With monitoring function downstream switching devices |
No |
| Laser protection class |
None |
| Wavelength of the sensor |
660 nm |
| Type of light |
Polarity free red light |
| Light dot |
0 mm² |
| AWG-number |
0 |
| Material of cable sheath |
Polyvinyl chloride (PVC) |
| With restart blockage |
No |
| Suitable for safety functions |
No |
| Degree of protection (IP) |
IP67 |
| Degree of protection (NEMA) |
4X |
| Product Standards |
UL 508; CSA-C22.2 No. 14; IEC60947-5-2; CE marking |
| UL File No. |
E166051 |
| UL Category Control No. |
NRKH, NRKH7 |
| CSA File No. |
UL report applies to both Canada and US |
| CSA Class No. |
– |
| North America Certification |
UL listed, certified by UL for use in Canada |
| Max. Voltage Rating |
30 V DC |
| Degree of Protection |
IEC: IP68, IP69K; UL/CSA Type: 1, 3, 4, 4x, 6, 6P, 12, 13 |