Schmersal : EX-CSS 8-180-2P+D-M-L-3G/D 5,0M-101190269
EX-CSS 8-180-2P+D-M-L-3G/D 5,0M
EX-CSS 8-180-2P+D-M-L-3G/D 5,0M-101190269
Pre-wired cable 7-poleComfortable diagnostics through sensor LED and electronic signalling outputThermoplastic enclosureElectronic contact-free, coded systemØ M18Misaligned actuation possibleHigh repeat accuracy of the switching pointsMax. length of the sensor chain 200 mEarly warning when operating near the limit of the sensor´s hysteris rangeSelf-monitoring series-wiring of 16 sensors2 short-circuit proof PNP safety outputsExplosion protection for ATEX Zones 2 and 22
- Pre-wired cable 7-pole
- Comfortable diagnostics through sensor LED and electronic signalling output
- Thermoplastic enclosure
- Electronic contact-free, coded system
- Ø M18
- Misaligned actuation possible
- High repeat accuracy of the switching points
- Max. length of the sensor chain 200 m
- Early warning when operating near the limit of the sensor´s hysteris range
- Self-monitoring series-wiring of 16 sensors
- 2 short-circuit proof PNP safety outputs
- Explosion protection for ATEX Zones 2 and 22
Ordering data
| Product type description | EX-CSS 8-180-2P+D-M-L-3G/D 5,0M |
| Article number (order number) | 101190269 |
| EAN (European Article Number) | 4030661349039 |
| eCl@ss number, version 12.0 | 27-27-46-01 |
| eCl@ss number, version 11.0 | 27-27-24-03 |
| eCl@ss number, version 9.0 | 27-27-24-03 |
| ETIM number, version 7.0 | EC001829 |
| ETIM number, version 6.0 | EC001829 |
Approvals - Standards
| TÜV UKCA |
Explosion protection
| Explosion protection: regulations | EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
| Explosion protection zones | 2 22 |
| Explosion protection category | 3G 3D |
| Explosion protection designation | D II 3G Ex nA IIB T6 Gc X D II 3G Ex nA IIC T6 Gc X D II 3D Ex tc IIIC T70°C Dc X |
Manufacturer declaration | ATEX Zone 2 and 22 |
General data
| Working principle | inductive |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Active area | Glass-fibre, reinforced thermoplastic |
| Material of the nuts | Glass-fibre, reinforced thermoplastic |
| Reaction time, maximum | 30 ms |
| Duration of risk, maximum | 30 ms |
| Gross weight | 340 g |
General data - Features
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Safety functions | Yes |
| Integral system diagnostics, status | Yes |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
| Number of series-wiring of sensors | 16 |
| Safety classification |
| Standards | EN ISO 13849-1 EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 2.50 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
Mechanical data
| Impact energy, maximum | 2 J |
| Tightening torque of nuts, maximum | 3 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Switch distance, typical | 8 mm |
| Assured switching distance "ON" Sao | 7 mm |
| Assured switching distance "OFF" Sar | 10 mm |
| Hysteresis (Switching distance), maximum | 0.7 mm |
| Repeat accuracy R | 0.2 mm |
Mechanical data - Connection technique
| Length of cable | 5 m |
| Termination | Cable |
| Terminal connector, Output | 7-pole |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
Mechanical data - Dimensions
| ISO thread of the sensor | M18 |
| width across flats | 24 BK |
| Length of sensor | 92 mm |
Ambient conditions
| Degree of protection | IP65 IP67 |
| Ambient temperature | -25 ... +40 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | II |
Ambient conditions - Insulation values
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical data
| Operating voltage | 24 VDC -15 % / +10 % |
| No-load supply current I0, typical | 50 mA |
| Rated operating voltage | 24 VDC |
| Operating current | 1,000 mA 500 mA |
| Switching frequency, approx. | 3 Hz |
| Utilisation category DC-12 | 24 VDC / 0.05 A |
Electrical data - Safety digital outputs
| Design of control elements | p-type |
| Voltage drop Ud, maximum | 0.5 V |
| Leakage current Ir, maximum | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.5 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.5 A |
Electrical data - Digital Output
| Design of control elements | p-type |
Electrical data - Diagnostic outputs
| Voltage drop Ud, maximum | 4 V |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.05 A |
Status indication
| Note (LED switching conditions display) | Multi-coloured LED: Green, Red, Yellow |
Pin assignment
| PIN 1 | A1 Ue Brown |
| PIN 2 | Y2 Safety output 2 red |
| PIN 3 | A2 GND Blue |
| PIN 4 | Y1 Safety output 1 Black |
| PIN 5 | X1 Safety input 1 violet |
| PIN 6 | X2 Safety input 2 White |
| PIN 7 | Signalling output Grey |
Scope of delivery
| Scope of delivery | Actuator must be ordered separately. |
| Scope of delivery of mounting material | 2x nuts M18 x 1 |
Accessory
| Recommendation (actuator) | CST 180-1 CST 180-2 |
Note
| Note (General) | Series-wiring of sensors: 16 safety sensors can be switched in series with self-monitoring. In this case, the dual-channel output of a sensor is switched to/inserted into the input of the next sensor. This does not affect the category 4 in accordance with EN ISO 13849-1. The voltage drop over a long sensor chain should be taken into account when planning cable routing. Operating voltage, cross-section and length of the cable, temperature, number of sensors connected, but also the input load of the control monitor all affect the voltage drop over the sensor chain. |
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
Similar Products
Can't find the product you're looking for?
LET US HELP YOU
Can't Find the Product You're Looking For? Let Us Know, and We'll Source It for You!
Are you searching for products not listed on our website or out of stock? Let us know your requirements, and our expert team will contact you as soon as possible to find the most suitable solution for you.
