Schmersal : BN 120L-10Z/V 2,0M-101210880
BN 120L-10Z/V 2,0M
BN 120L-10Z/V 2,0M-101210880
Actuation from frontwith bias magnetNon-contact principleLong lifeThermoplastic enclosureActuating distance up to 60 mm depending on actuating magnet and versionDesign Ø 10.7 mmwith central mountingWith pre-wired cable
- Actuation from front
- with bias magnet
- Non-contact principle
- Long life
- Thermoplastic enclosure
- Actuating distance up to 60 mm depending on actuating magnet and version
- Design Ø 10.7 mm
- with central mounting
- With pre-wired cable
Ordering data
| Note (Delivery capacity) | Phased-out product |
| Product type description | BN 120L-10Z/V 2,0M |
| Article number (order number) | 101210880 |
| EAN (European Article Number) | 4030661388472 |
| eCl@ss number, version 12.0 | 27-27-43-02 |
| eCl@ss number, version 11.0 | 27-27-01-05 |
| eCl@ss number, version 9.0 | 27-27-01-05 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
General data
| Working principle | Magnetic drive |
| Housing construction form | Cylinder, thread |
| Housing material | Glass-fibre, reinforced thermoplastic |
| Gross weight | 56 g |
General data - Features
| Suitable for elevators | Yes |
| bias magnet | Yes |
| Number of normally open (NO) | 1 |
Mechanical data
| Actuating panels | front side |
| Actuating element | Magnet |
| Mechanical life, minimum | 10,000,000 Operations |
| Mounting | central with threated flange M12 x 1 |
| Tightening torque of nuts, maximum | 0.9 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Switching distance Sn | 5 mm … 55 mm BP 10S = 5 mm 2 x BP 10S = 10 mm BP 15S = 6 mm BP 34S = 20 mm BP 20S = 15 mm BP 31S = 15 mm BP 11S = 5 mm 2 x BP 11S = 15 mm BP 12S = 10 mm 2 x BP 12S = 25 mm BP 21S = 30 mm 2 x BP 21S = 20 ... 55 mm BP 22S = 25 mm 2 x BP 22S = 15 ... 55 mm BE 20 S = 6 mm |
| Note (Switching distance Sn) | Actuating distance up to 55 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Repeat accuracy R | 0.3 mm |
Mechanical data - Connection technique
| Length of cable | 2 m |
| Termination | Cable |
| Wire cross-section | 0.25 mm2 |
| Wire cross-section | 23 AWG |
| Material of the Cable mantle | LiYY |
Mechanical data - Dimensions
| Diameter of sensor | 10.7 mm |
| width across flats | 17 BK |
| Length of sensor | 102 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature | -25 ... +70 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
Electrical data
| Switching voltage, maximum | 200 VAC |
| Switching voltage, maximum | 200 VDC |
| Switching current, maximum | 1 A |
| Switching capacity, maximum | 30 W |
| Switching capacity, maximum | 30 VA |
| Switching element | Normally open contact (NO) |
Electrical data - Digital Output
| Design of control elements | Reed contacts |
Scope of delivery
| Scope of delivery | Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) | BP 10 S 2x BP 10 S BP 15 S BP 34 S BP 20 S BP 31 S BP 11 S 2x BP 11 S BP 12 S 2x BP 12S BP 21 S 2x BP 21 S BP 22 S 2x BP 22 S BE 20 S |
| Recommendation (actuator, lift switchgear) | BP 10 2 x BP 10 BP 15 BP 34 |
Note
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
Similar Products
Can't find the product you're looking for?
LET US HELP YOU
Can't Find the Product You're Looking For? Let Us Know, and We'll Source It for You!
Are you searching for products not listed on our website or out of stock? Let us know your requirements, and our expert team will contact you as soon as possible to find the most suitable solution for you.
