Schmersal : AZ215-T12-103049870
AZ215-T12
AZ215-T12-103049870
small bodyMetal enclosureActuator heads can be repositioned in steps 4 x 90°Different contact optionsLatching force 12N or 30N depending on variant
- small body
- Metal enclosure
- Actuator heads can be repositioned in steps 4 x 90°
- Different contact options
- Latching force 12N or 30N depending on variant
Ordering data
| Product type description | AZ215-T12 |
| Article number (order number) | 103049870 |
| EAN (European Article Number) | 4030661625393 |
| eCl@ss number, version 12.0 | 27-27-06-10 |
| eCl@ss number, version 11.0 | 27-27-06-10 |
| eCl@ss number, version 9.0 | 27-27-06-10 |
| ETIM number, version 7.0 | EC002592 |
| ETIM number, version 6.0 | EC002592 |
Approvals - Standards
| cULus CCC |
General data
| Standards | EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | electromechanical |
| Housing material | Metal, zinc die-cast |
| Housing coating material | painted |
| Gross weight | 299 g |
General data - Features
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 2 |
| Number of cable glands | 1 |
| Safety classification |
| Standards | EN ISO 13849-1 |
| Performance Level, up to | c |
| Category | 1 |
| B10D Normally-closed contact (NC) | 2,000,000 Operations |
| B10D Normally-open contact (NO) | 1,000,000 Operations |
| Note | at 10% Ie and ohmic load |
| Mission time | 20 Year(s) |
| Safety classification - Fault exclusion |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to | d |
| Category | 3 |
| Note | for 2-channel use and with suitable logic unit. |
Mechanical data
| Mechanical life, minimum | 1,000,000 Operations |
| Latching force | 12 N |
| Positive break travel | 5 mm |
| Positive break force per NC contact, minimum | 10 N |
| Positive break force, minimum | 20 N |
| Actuating speed, maximum | 0.2 m/s |
| Mounting | Screws |
| Type of the fixing screws | 2x M4 |
| Tightening torque of the fixing screws | 2 Nm |
| Tightening torque of the fastening screws for the housing cover | 2.6 Nm |
Mechanical data - Connection technique
| Termination | Screw terminals M20 x 1.5 |
| Cable entry | 1 x M20 x 1,5 |
| Termination | Screw terminals |
| Cable section, minimum | 0.34 mm² |
| Cable section, maximum | 1.5 mm² |
| Note | All indications including the conductor ferrules. |
| Tightening torque of electrical connection, minimum | 0.6 Nm |
| Tightening torque of electrical connection, maximum | 0.8 Nm |
| Note (Cable entry) | Settle length of the conductor: 5...6mm |
| Allowed type of cable | solid single-wire solid multi-wire flexible |
Mechanical data - Dimensions
| Length of sensor | 32.7 mm |
| Width of sensor | 31 mm |
| Height of sensor | 104 mm |
Ambient conditions
| Degree of protection | IP66 IP67 |
| Ambient temperature | -30 ... +80 °C |
| Storage and transport temperature | -40 ... +85 °C |
| Permissible installation altitude above sea level, maximum | 2,000 m |
Ambient conditions - Insulation values
| Rated insulation voltage Ui | 300 VAC |
| Rated impulse withstand voltage Uimp | 4 kV |
| Overvoltage category | I |
| Degree of pollution | 3 |
Electrical data
| Thermal test current | 5 A |
| Required rated short-circuit current | 400 A |
| Switching element | 1 NO contact, 2 NC contacts |
| Note (Switching element) | Change-over contact with double break, type Zb or 3 NC contacts, with galvanically separated contact bridges |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 1,200 /h |
| Material of the contacts, electrical | Silver |
Electrical data - Safety contacts
| Voltage, Utilisation category AC-15 | 230 VAC |
| Current, Utilisation category AC-15 | 3 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 3 A |
Electrical data - Auxiliary contacts
| Voltage, Utilisation category AC-15 | 230 VAC |
| Current, Utilisation category AC-15 | 3 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 3 A |
Other data
| Note (applications) | sliding safety guard removable guard hinged safety guard |
Scope of delivery
| Scope of delivery | Actuator must be ordered separately. Slot cover for dust-proof covering of the opening not in use |
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
Similar Products
Can't find the product you're looking for?
LET US HELP YOU
Can't Find the Product You're Looking For? Let Us Know, and We'll Source It for You!
Are you searching for products not listed on our website or out of stock? Let us know your requirements, and our expert team will contact you as soon as possible to find the most suitable solution for you.
