Product range	xEnergy Safety Ci
Basic function	Basic enclosures
Product function	Panel enclosure with gland plates fitted
Single unit/Complete unit	Stand-alone device
Standards	EN 62208 EN 61439-2
Degree of Protection	IP65
Description	Sealable cover fasteners Sides closed, but with full area knockout Open top Fitting of cable supports in the distribution board with wedge-lock fastener Gland plate can be split, cables can be inserted from the front
Colour	RAL 7035, light gray (base) Transparent, smoky gray (cover)
Width	375 mm
Height	500 mm
Depth	225 mm
Mounting depth with mounting plate	200 mm
Mounting depth for mounting rail 7.5 mm height	192.5 mm
Mounting depth for mounting rail 15 mm height	185 mm
Legend for the graphic	Dimensions from top: Mounting depth with mounting plate Mounting depth for mounting rail 7.5 mm height Mounting depth for mounting rail 15 mm height Enclosure depth
Enclosure depth
Standards	EN 62208 EN 61439-2
Ambient temperature	-40 - +80 °C
Ambient temperature >Mean value over 24 hours	35 °C
Ambient temperature >Limit values >Ambient temperature limit value min.	-5 °C
Ambient temperature >Limit values >Ambient air temperature, limit values max.	40 °C
Degree of Protection	IP65
Protection type	IP65 (Enclosure) IP65 (KST cable entries from below) IP64 (KST cable entries from above) IP00 (Cable entry open)
Operating and ambient conditions to VDE 0660 Part 500 >Ambient temperature >Mean value over 24 hours	35 °C
Operating and ambient conditions to VDE 0660 Part 500 >Ambient temperature >Limit values	-5…40 °C
Operating and ambient conditions to VDE 0660 Part 500 >Indoor installation >Relative humidity	90 % (at 20°C) 50% (at 40°C)
Operating and ambient conditions to VDE 0660 Part 500 >Indoor installation >Altitude	Max. 2000 m
Operating and ambient conditions to VDE 0660 Part 500 >Protection type	IP65 (Enclosure) IP65 (KST cable entries from below) IP64 (KST cable entries from above) IP00 (Cable entry open)
Operating and ambient conditions to VDE 0660 Part 500 >Mounting grid	25 (DIN 43660) mm
Material	glass-fibre reinforced polycarbonate (base) non-reinforced polycarbonate (cover) Halogen free
Electrical >Track resistance	KB160, KC175 (base, to IEC 60112) KB100, KC200 (cover, to IEC 60112)
Electrical >Surface resistance to IEC 60093	1 Ω x 1013
Electrical >Dielectric strength to IEC 60243-1	30 kV/mm
Thermal >Temperature resistant	-40 °C - 120 °C (enclosure) 85 °C (enclosure bolt) 80 °C (gasket)
Chemical resistance >Chemical resistant	Resistant against: Acids < 10 %, mineral oil, alcohol, gasoline, greases, salt solutions Partly resistant to: Acids > 10 % Not resistant to: alkalis, benzene
Atmospheric >Saline spray	IEC 60068-2-11
Atmospheric >UV resistance	Beneath protective shield
Flammability characteristics >Flammability classification according to UL94	V1 (base) V2 (cover)
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	36 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Starting enclosure for wall mounting [PV]	33 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Middle enclosure for wall mounting [PV]	31 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	72 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Starting enclosure for wall mounting [PV]	67 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Middle enclosure for wall mounting [PV]	62 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Lower part: 960 °C / cover: 850 °C; meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Not relevant to indoor installations.
10.2 Strength of materials and parts >10.2.5 Lifting	30 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	IK10
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	IP65
10.4 Clearances and creepage distances	Is the panel builder´s responsibility.
10.5 Protection against electric shock	Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components	Is the panel builder´s responsibility.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Ui = 1000 V AC
10.9 Insulation properties >10.9.3 Impulse withstand voltage	8 kV
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Meets the product standard´s requirements.
Mounting method	Surface mounted (plaster)
Type of cover	Cover
Cover model	Closed
Type of door	None
Transparent cover/door	Yes
With lock	No
Nominal current (In)	1600 A
Height	500 mm
Width	375 mm
Depth	225 mm
Built-in depth	200 mm
Internal depth	200 mm
Plate thickness cabinet	6 mm
Plate thickness door/cover	6 mm
Colour	Grey
RAL-number	7035
Number of modules	1
Number of rows	0
Width in number of modular spacings	17
Number of openings for flange plates	5
Extension possible	Yes
Number of conduit inlets	3
Material housing	Plastic
Surface protection	Other
With mounting plate	No
Suitable for outdoor use	Yes
Suitable for lightning protection	Yes
Degree of protection (IP)	IP65
Degree of protection (NEMA)	Other
Protection class	II
Impact strength	IK10
Circuit integrity	None

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.